Brazed Diamond Tools ,Diamond Brazing Tooliong,Brazed Saw Blade,Drills
Home page     About us     Products     Contact us     Site map     E-mail us  for Inquiry
chinese website
Products Catalogue
Our Brazed Diamond Tools:
Brazed Diamond Wire Saw
Brazed Diamond Wire Saw Bead
Brazed Diamond Drill Bits
Brazed Diamond Saw Blade
Brazed Diamond Profile Wheel
Brazed Diamond Hand Profile Wheel
Brazed Diamond Cup Wheel
 

 

Home>Products>Brazed diamond tools>brazed diamond tools
Vacuum Brazed Diamond Tools
We supply various kinds of vacuum diamond brazed tools for stone cutting,our products include vacuum brazed diamond saw blade,vacuum brazed profile wheels,vacuum brazed diamond cup wheels,core drills/core bits,brazed diamond wire saw beads,brazed grinding disk etc , we also can manufacture and produce brazed diamond tool according to customers's request.
Vacuum Brazed Diamond Tools
brazed diamond saw blade brazed diamond saw blade brazed diamond hand profile wheel
     
brazed diamond edge grinding wheels brazed diamond wheels brazed diamond wire saw beads
     
brazed diamond shrank brazed diamond grinding wheels brazed diamond profile wheels
     
brazed cup grinding wheel brazed cutting and grinding disk brazed diamond cup wheel


1. Vacuum brazed diamond tools is characterized in its high sharpness, fine grinding efficiency, long working life, low cost and high performance, this products has get more and more popular by our clients. Products include: Vacuum brazed hand profile wheels, Router bits, Profiling wheels, Milling bits, Diamond drilling bits, Diamond graver, etc.
2.Vacuum brazed hand profile wheels
For shaping the edge or curve line for various granite and marble.
OD: 65mm 75mm 85mm 92mm; Thread: M14, 5/8”-11
Height: 5mm, 10mm, 20 mm, 30mm, 40mm, 50mm
Grit: Coarse, Medium, Fine.
Design: Eased, Bir’s beak, Bevel, Ogee, Full Bullnose, etc
3. Diamond profile wheel for hand grinders, radius, bevel, full bull nose.
Profile wheels for hand grinders.
Profile hard granite, stone&marble.
Type: 3/16” radius, 3/8” radius, 1/2” radius, 3/4” radius. 3/16” bevel, 3/8” bevel, 3/4” bevel, 1-1/2” full bullnose, 1-1/4” full bullnose. 3/8” ogee, 3/4” ogee. Etc. special type could be done based on customer’s design.
4. Diamond ogee profile wheels vacuum brazed.
Vacuum brazed diamond profile wheel, ogee design, for hand machine grinders. Profile hard granite, stone&marble.
OD: 65mm, 75mm, 85mm. Height: 10mm to 40mm.
5. Diamond radius profile wheels vacuum brazed.
Vacuum brazed diamond profile wheel, radius design, for hand machine grinders. Profile hard granite, marble.
OD: 65mm, 75mm, 85mm. Height: 10mm to 40mm.
6. Diamond profile wheels vacuum brazed.
Vacuum brazed diamond profile wheel, design would be made upon customer’s request。 for hand machine grinders. Profile hard granite, marble.
OD: 65mm, 75mm, 85mm. Height: 20mm to 40mm.
7.Vacuum brazed diamond router bits
For shaping the edge or curve line for various granite and marble on router machine
OD: 65mm 75mm 85mm 92mm; Thread: M14, 5/8”-11
Height: 5mm, 10mm, 20 mm, 30mm, 40mm, 50mm
Grit: Coarse, Medium, Fine.
Design: Eased, Bir’s beak, Bevel, Ogee, Full Bullnose, etc
8 .Router bits
For shaping the edge or curve line for various granite and marble on router machine
OD: 65mm 75mm 85mm 92mm; Thread: M14, 5/8”-11
Height: 5mm, 10mm, 20 mm, 30mm,40mm, 50mm
Grit: Coarse, Medium, Fine.
Design: Eased, Bir’s beak, Bevel, Ogee, Full Bullnose, etc
9. Vacuum brazed diamond drilling bits
For drilling granite, marble, concrete and wall with very high free cutting, high efficiency, excellent performance and long working life.
OD:6mm-200mm
Thread: M14, 5/8”-11, 3/8”shaft. Length: 80mm
10. Vacuum brazed Profiling wheels.
For shaping the edge or curve line for various granite and marble. We will design and make them according to your special request.
OD:140mm 150mm 200mm 250mm, upto 350mm.
Height:10mm 20mm 30mm up to 200mm
Grit: Coarse Medium Fine
11.Vacuum brazed Profiling wheels demi bullnose.
For shaping the edge or curve line for various granite and marble. We will design and make them according to your special request.
OD:140mm 150mm 200mm 250mm, upto 350mm.
Height:10mm 20mm 30mm up to 200mm
Grit: Coarse Medium Fine
12. Polishing wheels, Resin bond polishing wheels.
Resin bond diamond profiling wheels is used on polishing stone, this course is after vacuum brazed diamond profiling wheels. Total four grist to get the gloss finishing.
OD: 150mm.
13. Vacuum brazed diamond milling bits.
For milling groove of the inner side of stone.
OD: 25mm 50mm 75mm 100mm
Height: 50mm
14. Milling bits
For milling groove of the inner side of stone.
OD: 25mm 50mm 75mm 100mm
15. Vacuum brazed diamond graver
Used on special machines to process various granite, marble, etc.
OD: 10/20/25/40mm.
Height: 30mm.
16. Vacuum brazed diamond grinding cup wheel.
Vacuum brazed diamond grinding cup wheels is used in grinding the surfact of various granite, marble, concrete, etc. Diamond grit differ coarse, medium, fine. Hole with 16mm, 20mm, 22.23mm. or with thread size with M14 or 5/8”-11.
OD: 105-180MM.
17. Router bits machine
Router bits machine is widely used in stone processing
industry. This machine has stable performance, rational design and multi functions, is applicable to different power supply.
Rotation speed: 8400rpm Frequency: 50Hz, 60Hz,
Voltage: 110v, 220v, 380v. Power: 2200w.
Synthetic Diamond Grits Diamond Micron Powder CBN abrasives PDC cutters PCBN ,solid PCBN PCD,TSP
PCD inserts Brazed Diamond Tools Diamond grinding Wheels Diamond CBN Sandpaper Diamond Saw Blade CVD products
Diamond Segments Diamond Wire Saw Diamond Core Drill Bit Diamond Cup Wheels Diamond scribing Wheel Diamond Glass Cutter
PCD Cup Grinding Wheel Resin Polishing Pads PCD Wire Drawing Die Blank Diamond Honing Stone Electroplated diamond tool [ Machinery &Equipments ]
Tel: 0086-731-89853480          Fax: 0086-731-89853490          Mobile: 0086-13875858570

E-mail for inquiry:   allendiamond@vip.126.com          sales@china-superabrasives.com